Назад

РЕЗУЛТАТИ ПРОДУКЦИЈЕ НАУЧНО ИСТРАЖИВАЧКОГ/УМЈЕТНИЧКОГ РАДА

Milija Kraišnik

vanredni profesor

milija.kraisnik@ues.rs.ba

+38757340847

Чланица : Машински факултет

Датум избора у звање : 22.09.2019

Ужа научна област : Mаšinstvo - Proizvodne tehnologije i materijali

HHN-6135-2022

0000-0001-9672-7121

57192670001

https://scholar.google.com/citations?hl=hr&user=cZYy2FsAAAAJ

 

 Научне књиге Укупно
3
  1. M. Kraišnik, R. Čep, K. Kouřil, S. Baloš, A. Antić, M. Milutinović, "Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load", Prime Archives in Material Science: 4th Edition, editor: Esubalew Kasaw Gebeyehu, Vol. 4, pp. 1-43, ISBN 978-93-92117-40-4, URL https://videleaf.com/product/prime-archives-in-material-science-4th-edition/, 2022
  2. M. Kraišnik, A. Đurić, M. Milutinović, "Characterization of Mechanical Properties of Metal Biomaterials", Zivic F., Affatato S., Trajanovic M., Schnabelrauch M., Grujovic N., Choy K. (eds) Biomaterials in Clinical Practice. Springer, Cham, ISBN 978-3-319-68024-8, DOI https://doi.org/10.1007/978-3-319-68025-5_23, URL https://link.springer.com/chapter/10.1007/978-3-319-68025-5_23#citeas, 2018
  3. M. Milutinović, M. Kraišnik, "Nekonvencionalni postupci obrade plastičnim deformisanjem", UDK 621.7.01:539.374(075.8), 2019
 Научни часописи Укупно
14
  1. M. Kraišnik, R. Čep, K. Kouřil, S. Baloš, A. Antić, M. Milutinović, "Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load", Crystals, Vol. 12, No. 3, pp. 426, ISSN 2073-4352, DOI https://doi.org/10.3390/cryst12030426, URL https://www.mdpi.com/2073-4352/12/3/426/htm, 2022
  2. M. Milutinović, M. Milošević, J. Ilić, D. Movrin, M. Kraišnik, S. Ranđelović, D. Lukić, "Industry 4.0 and New Paradigms in the Field of Metal Forming", TECHNICAL JOURNAL, Vol. 15, No. 2, pp. 250-257, ISSN 1848-5588, DOI https://doi.org/10.31803/tg-20210524192249, URL https://hrcak.srce.hr/index.php?show=toc&id_broj=20504&lang=en, 2021
  3. M. Šljivić, A. Pavlovic, M. Kraišnik, J. Ilić, "Comparing the accuracy of 3D slicer software in printed enduse parts", IOP Conference Series: Materials Science and Engineering, Vol. 659, No. 1, DOI doi:10.1088/1757-899X/659/1/012082, URL https://iopscience.iop.org/article/10.1088/1757-899X/659/1/012082/pdf, 2019
  4. M. Šljivić, M. Kraišnik, J. Ilić, J. Anić, "DEVELOPMENT OF SMALL BATCHES OF FUNCTIONAL PARTS USING INTEGRATION OF 3D PRINTING AND VACUUM CASTING TECHNOLOGY ", ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, Vol. XI, No. 2, pp. 35-38, ISSN 2067-3809, 2018
  5. A. Pavlović, M. Šljivić, M. Kraišnik, J. Ilić, J. Anić, "Polymers in Additive Manufacturing: the Case of a Water Pump Impeller", FME Transactions , Vol. 45, No. 3, pp. 354-359, ISSN 2406-128X , UDK 621, 2017
  6. M. Kraišnik, M. Šljivić, J. Anić, J. Ilić, "Pritisna svojstva često korišćenih polimera u procesima aditivne proizvodnje", ACTA TECHNICA CORVINIENSIS- – Bulletin of Engineering, Vol. X, No. 2, pp. 33-38, ISSN 2067 – 3809, 2017
  7. M. Kraišnik, M. Šljivić, J. Anić, J. Ilić, B. Mijatović, "Some aspects of development of ductile crack in the process of cold bulk forming", ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol. XV, No. 2, pp. 47-55, ISSN 1584-2665 , 2017
  8. M. Kraišnik, D. Vilotić, L. Šiđanin, M. Stefanović, J. Anić, "Application potential of some criteria of ductile crack in bulk forming processes", ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol. XIV, No. 1, pp. 171-177, ISSN 1584-2665, 2016
  9. M. Kraišnik, D. Vilotić, L. Šiđanin, Ž. Petrović, M. Šljivić, M. Stefanović, "Morphology of steel C45E microstructure during upsetting", ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol. XIII, No. 3, pp. 77-81, 2015
  10. M. Kraišnik, D. Vilotić, L. Šiđanin, M. Stefanović, "Various approaches to defining the criteria of ductile crack in cold bulk forming processes", ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol. XIII, No. 2, ISSN 1584-2665 , 2015
  11. M. Kraišnik, D. Vilotić, L. Šiđanin, Ž. Petrović, "Experimental verification of different theoretical approaches for defining FLD", ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol. XII, No. 1, pp. 211-216, ISSN 1584-2665 , 2014
  12. M. Šljivić, C. Fragassa, A. Pavlović, M. Kraišnik, J. Ilić, M. Stanojević, "Additive manufacturing of functional parts based on material extrusion technology", Contemporary Materials, Vol. VII, No. 2, pp. 178-184, UDK 537.565:533.6.011, DOI 10.7251/COMEN1602178S , 2016
  13. M. Kraišnik, D. Vilotić, L. Šiđanin, M. Šljivić, M. Stefanović, J. Ilić, "Analysis of microstructural damage on C45E steel in the process of cold upsetting of a cylinder", Journal for Technology of Plasticity, Vol. 41, No. 1, pp. 27-36, ISSN 0354-3870, 2016
  14. M. Kraišnik, D. Vilotić, L. Šiđanin, M. Stefanović, "Experimental and numeric analysis of steel C45E formability in the upsetting processes of tapered specimen", Journal of Production Engineering, Vol. 18, No. 2, pp. 5-10, ISSN 1821-4932, 2015
 Научни скупови Укупно
44
  1. J. Ilić, T. Grbić, M. Hadžistević, M. Milutinović, M. Kraišnik, D. Movrin, "Influence of process parameters in the process of deep drawing with plastic tool", 16th International Conference on Accomplishments in Mechanical and Industrial Engineering – DEMI 2023, pp. 84-89, 2023
  2. J. Anić, M. Milutinović, M. Kraišnik, S. Moljević, "The current state of art on microforming", XIII International Conference on Industrial Engineering and Environmental Protection (IIZS 2023) , pp. 105-112, ISBN 978-86-7672-368-3, 2023
  3. J. Ilić, M. Milutinović, M. Kraišnik, D. Movrin, "Sheet metal forming using vacuum cast polymer tool", 6th International Scientific Conference - ”Conference on Mechanical Engineering Technologies and Applications” (COMETa2022), pp. 146-152, ISBN 978-99976-947-6-8, URL http://cometa.ues.rs.ba/, 2022
  4. J. Ilić, M. Milutinović, M. Kraišnik, M. Marković, "Advanced metal forming tools as a main link of digital manufacturing", 15th International Conference on Accomplishments in Mechanical and Industrial Engineering – DEMI 2021, pp. 77-80, ISBN 978-99938-39-92-7, URL https://demi.mf.unibl.org/sr/arhiva/, 2021
  5. M. Milutinović, З. Коњовић, S. Ranđelović, D. Movrin, M. Vilotić, L. Stefanović, M. Kraišnik, "Recent achievements in the production of bi and multi-metal components by metal forming technologies", 14 th International Scientific Conference MMA 2021 – Flexible Technologies, pp. 163-166, ISBN ISBN 978-86-6022-364-9, UDK 621.7/.9(082) 621.9(082), 2021
  6. J. Ilić, M. Milutinović, D. Vilotić, M. Kraišnik, D. Movrin, "The concept of a smart tool in metal forming", Proceedings 5th International Scientific Conference - ”Conference on Mechanical Engineering Technologies and Applications” (COMETa2020), pp. 99-102, ISBN ISBN 978-99976-719-8-1, UDK 621.03(082)(0.034.4), URL http://cometa.ues.rs.ba/Zbornik%20COMETa2020.pdf, 2020
  7. M. Milutinović, S. Trifković, M. Kraišnik, "Construction Of The Punch Machine For Cutting Pockets In The Car Bumpers", IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019) , pp. 4, ISBN ISBN: 978-86-7672-324-9, 2019
  8. J. Anić, B. Marković, M. Kraišnik, J. Ilić, "FABRICATION OF AN AUTHENTIC PART USING MATERIAL EXTRUSION TECHNOLOGY", VIII International Conference Industrial Engineeringand Environmental Protection (IIZS2018), pp. 90-96, ISBN 978-86-7672-309-6, 2018
  9. J. Ilić, M. Kraišnik, G. Jotić, J. Anić, "FABRICATION OF AUTHENTIC FUNCTIONAL PARTS FOR OLDTIMER USING INTEGRATION OF REVERSE ENGEENERING AND 3D PRINTING", 13th INTERNATIONAL SCIENTIFIC CONFERENCE MMA 2018 - FLEXIBLE TECHNOLOGIES, ISBN 978-86-6022-094-5, 2018
  10. D. Vilotić, M. Kraišnik, M. Milutinović, D. Movrin, M. Vilotić, J. Anić, M. Fićko, "MATERIAL FORMABILITY AT BULK METAL FORMING, CRITERIA,METHOD OF DETERMINATION AND APPLICATION", 4th INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2018, pp. 58-67, ISBN 978-99976-719-4-3, 2018
  11. M. Šljivić, M. Kraišnik, J. Ilić, J. Anić, "Development of small batches of functional parts using integration of 3D printing and vacuum casting technology", 13th International Conference on Accomplishments in Mechanical and Industrial Engineering – DEMI 2017, pp. 121-126, ISBN 978-99938-39-73-6, 2017
  12. M. Kraišnik, M. Šljivić, J. Ilić, J. Anić, "Fabrication of small batches of functional and authentic parts for old-timers using integration of material extrusion and vacuum casting technologies", 6th International Conference on Manufacturing Engineering – ICMEN 2017, pp. 153-162, ISBN 978-618-80878-4-2, 2017
  13. D. Vilotić, P. Skakun, M. Kraišnik, M. Milutinović, D. Movrin, L. Stefanović, "Workability criterion in bulk metal forming", 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), No. T15-1.1, pp. 1-5, UDK 978-86-7892-933-5, 2017
  14. M. Stefanović, D. Adamović, A. Stefanović, M. Kraišnik, "Ekološki i energetski aspekti u razvoju tehnologija plastičnog oblikovanja", 3. Međunarodna naučna konferencija COMETa2016, pp. 249-254, ISBN 978-99976-623-7-8, 2016
  15. M. Stefanović, D. Adamović, Z. Gulišija, S. Aleksandrović, M. Kraišnik, V. Mandić, "Characteristics and limitations of physical tribo-modelling in deep drawing of thin sheet metal", 14th International Conference on Tribology – SERBIATRIB ’15, pp. 382-387, ISBN 978-86-7083-857-4, 2015
  16. M. Jocanović, V. Karanović, Đ. Vukelić, D. Knežević, M. Kraišnik, "Dijagnostička oprema za praćenje fizičko-hemijskog stanja UTTO I STOU traktorskih ulja", 2. Međunarodna naučna konferencija – Primijenjene tehnologije u mašinskom inženjerstvu (COMETa2014), pp. 631-640, ISBN 978-99938-655-4-4, 2014
  17. M. Jocanović, V. Karanović, M. Kraišnik, "Solid contaminants in hydraulic oil and their impact on the intensity of wear and tear of working elements in directional valves", 2nd International Scientific Conference - ”Conference on Mechanical Engineering Technologies and Applications” (COMETa2014), pp. 195-202, ISBN 978-99976-623-1-6, 2014
  18. M. Kraišnik, D. Vilotić, L. Šiđanin, Ž. Petrović, "Initial microstructure state impact to steel C45E formability", 11th International Scientific Conference MMA 2012- Advanced Production Technologies, pp. 453-458, ISBN 978-86-7892-419-4, 2012
  19. V. Karanović, M. Jocanović, D. Knežević, M. Kraišnik, "Razvoj integrabilnog elektrohidrauličnog aktuatora za robote", 1. Međunarodna naučna konferencija – Primijenjene tehnologije u mašinskom inženjerstvu (COMETa2012), pp. 447-456, ISBN 978-99938-655-4-4, 2012
  20. M. Kraišnik, A. Košarac, Ž. Petrović, "Experimental verification of stress state impact to workability in cold cylinder upsetting processes whit varius tools", I International Conference – Process Technology And Environmental Protection (PTEP 2011), pp. 196-203, ISBN 978-86-7672-152-8, 2011
  21. N. Radić, M. Kraišnik, S. Trifković, "Numerical analysis of free upsetting cylinder using FEM with experimental verification", INFOTEH 2011, pp. 239-243, ISBN 978- 99938-624-2-8, 2011
  22. S. Trifković, M. Kraišnik, N. Radić, "Analiza pouzdanosti podsistema za kopanje rotornog bagera ER – 1250", INFOTEH 2010, pp. 352-356, ISBN 99938-624-2-8, 2010
  23. N. Radić, M. Kraišnik, S. Trifković, "Numerical-experimental determination of stress-strain state during upsetting process of cylindrical specimen", 27th DANUBIA - ADRIA Symposium, pp. 151-152, ISBN 978-83-87982-59-1, 2010
  24. M. Kraišnik, S. Trifković, "Analysis of influence factors on flow stress in micro-forming processes", 4th International conference on engineering technologies-ICET 2009, pp. 55-59, ISBN 978-86-7892-227-5, 2009
  25. M. Kraišnik, D. Vilotić, M. Plančak, M. Stefanović, "Deformabilnost materijala u procesima slobodnog sabijanja valjka različitim alatima", 6. Međunarodna konferencija o proizvodnom inžinjerstvu, pp. 1-6, ISBN 978-9958-9262-1-1, 2007
  26. D. Knežević, V. Savić, M. Kraišnik, "Dostignuća u pogledu poboljšanja efikasnosti rada hidrauličnih sistema", DEMI 2007, pp. 569-576, ISBN 978-99938-39-15-6, 2007
  27. M. Kraišnik, "Kontaktno trenje u procesima mikrodeformisanja", 10th International Conference on Tribology, SERBIATRIB ‘07, pp. 269-272, ISBN 978-86-86663-13-9, 2007
  28. M. Kraišnik, D. Vilotić, M. Plančak, M. Stefanović, "Deformabilnost materijala pri sabijanju valjka izdubljenim pločama", DEMI 2005, pp. 225-230, ISBN 99938-39-08-6, 2005
  29. V. Savić, M. Jocanović, M. Kraišnik, "Novi pristup u određivanju potrebne čistoće hidrauličkih fluida", 8th International Tribology Conference, pp. 198-201, ISBN 86-80581-57-7, UDK 621.89(82), 2003
  30. D. Knežević, V. Savić, M. Tankosić, M. Jocanović, M. Kraišnik, "Elastična svojstva mineralnih ulja za hidrauličke sisteme – Dekompresija ulja u cilindrima hidrauličkih presa", DEMI 2002, pp. 205-211, UDK 621.3(082), 2002
  31. V. Savić, M. Jocanović, D. Knežević, M. Kraišnik, "Kinematics of distribution of pressure within pipeline of two line sistems for lubrication", VIIth International symposium INTERTRIBO 2002, 2002
  32. M. Kraišnik, "Određivanje deformabilnosti materijala pri sabijanju valjka sferičnim kalupima", DEMI 2002, pp. 159-165, ISBN 99938-623-2-0, 2002
  33. D. Knežević, V. Savić, M. Tankosić, M. Jocanović, M. Kraišnik, "Teorijski aspekt dekompresije ulja u hidrauličnim cilindrima", DEMI 2001, pp. 345-350, UDK 621.001.6, 621.3001.6, 2001
  34. D. Vilotić, M. Kraišnik, "Dijagram granične deformabilnosti pri hladnom zapreminskom deformisanju", ETIKUM 2017, pp. 91-94, ISBN 978-86-6022-00-68, 2017
  35. M. Kraišnik, D. Vilotić, M. Stefanović, M. Šljivić, J. Anić, J. Ilić, "Testovi deformabilnosti bazirani na procesima sabijanja cilindričnih uzoraka različitim alatima", Konferencija sa međunarodnim učešćem "Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju", pp. 121-127, ISBN 978-915487-1-1, 2017
  36. M. Kraišnik, M. Šljivić, S. Trifković, "Neki aspekti deformabilnosti poroznih materijala dobijenih postupcima metalurgije praha", 33. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, pp. 83-86, ISBN 978-86-7083-662-4, 2009
  37. M. Jocanović, V. Savić, V. Karanović, M. Kraišnik, "Proračun promene broja čestica u uljnoj masi hidrauličkog sistema kod izdvajanja sekundarnim filterom", 31. Kongres o hidropneumatičkoj automatizaciji HIPNEF, pp. 49-54, ISBN 978-86-80587-87-5, UDK 621.5/.06(082), 681.5(082) , 2008
  38. M. Kraišnik, D. Vilotić, M. Plančak, M. Stefanović, "Uticaj geometrije alata i geometrije pripremka na deformabilnost materijala u procesima hladnog sabijanja valjka", 32. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, pp. 165-168, ISBN 978-86-7892-131-5, 2008
  39. D. Vilotić, D. Movrin, M. Plančak, I. Trbojević, M. Kraišnik, "Deformabilnost materijala pri sabijanju punog i šupljeg valjka ravnim i izdubljenim pločama", 31 Savetovanje proizvodnog mašinstva, pp. 127-132, ISBN 86-80581-92-5, 2006
  40. S. Stojadinović, M. Kraišnik, "Uticaj fizičko-metalurških parametara na svojstva ekstrudiranih polufabrikata AlMgSi legura", VI Naučno/stručni simpozijum sa međunarodnim učešćem “Metalni i nemetalni anorganski materijali”, pp. 147-151, ISBN 9958-785-02-1, 2006
  41. S. Stojadinović, N. Bajić, M. Kraišnik, "Uticaj hemijskog sastava, strukture i temperature na osobine niskougljeničnih čelika pri deformacionom starenju", VI Naučno/stručni simpozijum sa međunarodnim učešćem “Metalni i nemetalni anorganski materijali”, pp. 177-182, ISBN 9958-785-02-1, 2006
  42. V. Savić, M. Jocanović, D. Knežević, M. Kraišnik, "Različiti pristupi izboru zazora unutar hidrauličkih komponenti", JUMO Konferencija, pp. 73-79, UDK 621-772(082) , 2002
  43. M. Kraišnik, "Flow Stress in Microforming Processes ", 25th Yugoslav Congress on Theoretical and Applied Mechanics, pp. 120, ISBN 86-85211-52-2, 2005
  44. B. Marković, R. Antunović, M. Kraišnik, "Proceedings of the 2nd International Scientific Conference COMETa 2014", 2nd International Scientific Conference - ”Conference on Mechanical Engineering Technologies and Applications” COMETa2014, ISBN 978-99976-623-1-6, 2014